best oil for valve

[hairyviking]

what is the oil i should puth through my x valves? and the best way to get it in is through the asa, correct?
thanks

[Abizdafuzz]

Airtool oil, and yes I would go through the air fitting on the side of the valve.

[xero28]

I like using Gold Cup. Always been good to me. ASA is the recommended spot.

[georgeyew]

Here is a previous discussion on the oil topic:

http://www.automags.org/forums/showthread.php?t=221804&highlight=superlube

[Ando]

I been using Tri-flow for years on my mag. The oil won't dry and gum up the internals like most oils do.

And just about all Pro teams use it from cycling to NASCAR

[Newt]

It's not really picky. Any clean, medium weight oil that won't gun should be just fine.

If the oil is made with Magic Elves, it will work best.

[hairyviking]

haha, i will be onthe lookout for one made by magic elves... thanks for all the replies. didnt know the specific consistancy i was supposed to be using...

[kevdupuis]

If you grab the stuff made with magic elves make sure the bottle says filtered, the other stuff is chunky and has a tendency to block passages.

[Newt]

Correct. Also, the stuff should be made by magic elves. The stuff made with magic elves tends to have chunks.

[SSP REAPER]

I have always used Gold Cup in both the fittings and ASA
also KC Trouble Free is nice to

[georgeyew]

I have always used Gold Cup in both the fittings and ASA
also KC Trouble Free is nice to

Since KC is out of business, it's hard to find any leftover stock.

[SSP REAPER]

Since KC is out of business, it's hard to find any leftover stock.

this is true. you can occasionally find it on Ebay and by doing a yahoo/google search