I have been looking around and I cant find clear instructions on how to make a pneumag. I might have missed it but want step by step help in doing this. Never done anything like this before so it will be a challenge. Also want to know how to tune it and what parts I will need.
-
-
-
Imo, the hard part is actually figuring out where you will mount your LPR and where you will run the air lines, especially as they run around the ram and 3-way.Comment
-
Another option is to buy a Cheater manifold from Zap.
It's more expensive, but much less hastle. I wish I could have built my pneumag with one.Comment
-
Hey guys...I thought I would ask a question here instead of starting another thread. I am also trying to pnuemag for the first time and having trouble. I am using the kit from Cyberave with a new Autococker LPR that has the allen head adjuster. My problem is I keep blowing the input hose on the msv-2. I have tried several of the plastic fittings that come with the kit and even the metal fitting that came on the lpr. I have adjusted the output on the lpr and cant get it low enough to not blow the hose. Will this lpr not work for a pnuemag???Last edited by Flatliner333; 10-05-2009, 02:41 PM.sigpicComment
-
Originally posted by Flatliner333
Do you have any idea how much PSI you have it reg'd down to? All the way in, or all the way should be super low/off.
Adjust it without the hose on and see what pressure is the lowest.
Should only need I think it's 40-60 PSI.
DMComment
Comment