alright ive played paintball for almost 10 years, started with mags and now going back to them but i made a noobie mistake on my pnuemag. i have everything together and when i went to fire it up damn thing went full auto at my local field upon ripping it apart i realized my dumba$$ forgot the sear, just wondering if any sear will work or if i need a specific 1 (My pnue is a karta/chimera setup). And also is it possible to mount an emag board into a stormwalk frame any help would be appreciated.
-
-
im gonna say its a karta rail correct which if i recall corectly it takes a AM/MM sear just remove the sear arm and it should be good to go. as far as mounting a board goes yes you can just requires a lil work inside depending on the board you wanna mountOriginally posted by the grass fever2k2 Angel LCD
turbo trigger
CP volumizer
PIPE KIT
2k Angel CnC LCD
Vert Frame
Freak Barrel
B2k x-milled
micro rock
Dye sticky 3's
vertical max-flo
Edge barrel with blue J&J tip
Egg 2 y board
Empire Reloader
Dye Throttle 91/4500
Crossfire 114ci/3000
Angel Air Reg -
Karta rails use RT Sears. You'll have to remove the sear arm to get it to work.
As for your other Q. Are you using all the internals of the EMeg as well?Comment
-
No, emag boards only fit the emag frames. That is mainly because of the LED part of the board, but even the rest of the board has a special shape to fit the emag frame.Originally posted by the grass feverExcept for the Automag in front, its usually the man behind the equipment that counts.Comment
-
so if not the emag board is there any others that would work that u know ofComment
-
get a universal T board from scenario dreams. they are cheap, small, legal, work on anything in anything.Comment
-
I'm going to be e-pnum my Stormwind here in a few months.
Let me know how yours works out.Comment
-
Pretty much any board that will fit in the frame will work. It has to have a dwell setting, and most do.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment