which part of a mag body is cut - able?

[pk5]

hi everyone

inspired by the green and white sniper, what part of the mag body can be cut for cosmetic reason?

thanks

[BiNumber3]

There's about an inch of the body from the back that you can cut into without problems, anywhere past there and you risk gettin dirt and whatnot into the bolt/spring area. People have cut windows and such, and if you look at Karta bodies and similar, the cuts go pretty far.

On the front of the body, for twistlock bodies you can probably cut windows and such as well, since the barrel will be covering the breach.

If you mean to cut it off, and not just windows or designs, id recommend against that.

[Frizzle Fry]

I've had no problem cutting a good inch off the front of a classic body... I cut the rail down to match. Just as long as there's a twistlock pin and enough body to keep the barrel straight. I ended up using an Angel frame / ASA and it worked just fine.