TacOne Warp Right body

[kszyszkowski]

An idea crossed my mind to buy TacOne warp right body and BT rip clip and add it as main feeder.

I saw Rip Clips attached to TM15 markers with some spacer, I also saw the ULE with Rip Clip attached but I just like rails.

http://www.automags.org/forums/showthread.php?p=2567551

So I have some question that I hope somebody more experienced will answer:

If the standard rail for centerfeed TacOne fits the warp right body without milling (assuming I do not plan to use Warp with it) ?

I would prefer to buy a new body but on AGD site this is not available any longer. Did they stop making them? The alternative is BST therad as I understand. Any e-mail in AGD directly to aslk the question ?

[Tunaman]

all rails need to be notched for any warp body. I believe I have one new Tac One Warp right body and rail combo left. Email me at [email protected]

[kszyszkowski]

English is not my native language so I do not fully understand what is exactly the "notch" difference.

What is this notch used for (different side profile of the body enforces different rail shape ?) ?
Does it mean I cannot use regular centerfeed rail for warp body (even if I will not be using Warp Feed)?

Will Pm you on body.

[vf-xx]

English is not my native language so I do not fully understand what is exactly the "notch" difference.

What is this notch used for (different side profile of the body enforces different rail shape ?) ?
Does it mean I cannot use regular centerfeed rail for warp body (even if I will not be using Warp Feed)?

Will Pm you on body.

Bingo. All AL warp bodies have an enlarged section to support the feedneck threads. This section interferes with a standard rail. That said, they only make centerfeed rails, then modify them to fit the warp body.

[correia3]

It has been done with a warp right ULE body:

http://www.automags.org/forums/showthread.php?t=235476&highlight=rip+clip

[CatoRockwell]

does anyone know how I build this?

[kszyszkowski]

Send PM to zinc_edenballfrance and had the discussion already.

For ULT body you will need: raised rail to be mounted on body to mount the RipClip + you will need to make the feedneck a little bit shorter and sand down inlet to the rip clip (based on zincedenballfrance info the diameter is different) plus maybe some putty to create a kind of spacer between the body and ripclip to keep more solid.

http://cgi.ebay.com/AGD-Automag-Min...=item518d1c6a5c
For other markers special spacer is available but not for Automag so far I guess.

http://www.flascpaintball.com/servlet/the-351/Flasc-TM-dsh-7-Rip-Clip/Detail

Maybe someone would be able to produce them for AGD ?

I've found also following example of mounting it on TacOne - raised rail and similar actions as in ULT body case might be required:

http://translate.google.pl/translate?prev=hp&hl=pl&js=y&u=http%3A%2F%2Fforums.scenario-paintball.com%2Ftopic%2F20290-tac-one-casv-rip-clip%2F&sl=fr&tl=en&history_state0=

I'm tempted to do it but first need to get some budget for it.

[Neo-Gp]

I love ingenuity and imagination...