Looking for a specific air fitting..

[Shirow]

I'm looking for a fitting that would screw into the hole on my ASA and give me two extra holes, one that I can put a macroline fitting into and one I can screw an LPR into. I don't want a T fitting though, I'd like it in the shape of an 'L' (so the LPR can be horizontal and the macroline fitting can be screwed in vertically)

Anyone know where I can get this?

[MANN]

parker or swagelok or other similar fitting companies.

[BiNumber3]

I was searching for something similar back when i made my first pneu, but never could find any. Even searching direct from catalogs:/ Granted I didnt search too hard lol

I ended up getting a T from Palmers (I liked how the T with an lpr on it looked, n the marco went straight to my vert asa), you might try contacting them n seeing if they have any idea where you might get a specific fitting

[Ando]

what direction would you want the airport come out of?

[Shirow]

I'm thinking one parallel to the bottom of the gripframe for the LPR and one straight down for the macro. The air port is on the left hand side of my ASA, I use an Eclipse OOPS.

[Ando]

So your looking for something like this with an additional airport going out at the 3 o'clock position?

There's no way that can be done unless you beef up the housing which will make it look a little awkward with a big hunk of metal coming out of your marker. Your best bet, which is what most do is to get a normal ASA and tap it in what ever direction you want for your lpr.

[BiNumber3]

I was thinking he wanted something more like: 2 female ports, 90 degrees fromm eachother, then another port coming straight out of the page

If one isnt currently available anywhere, it might be doable to make one out of a black of brass

[Shirow]

I was thinking he wanted something more like: 2 female ports, 90 degrees fromm eachother, then another port coming straight out of the page

If one isnt currently available anywhere, it might be doable to make one out of a black of brass

That's exactly what I am looking for.

[PaintballEngineer]

Heres just about what your looking for

http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=1_10&products_id=18

[Shirow]

Heres just about what your looking for

http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=1_10&products_id=18

Yup, that is almost it.. and that might work, I'd have to measure to make sure there is space by my warp for that plus the macroline elbow.. thanks!

[Riddler236]

Many on/off ASAs come with two 1/8" NPT holes stock (one on the left, one on the right). Seems like that could clean up your setup.

Another option would be having an on/off (the CP mini direct mount is a common choice) tapped on the top to accept an air fitting, and then stealth install your LPR inside the frame.

[dark blade]

i know what he means. he is talking about a fitting that has an attachment port on all three axis's... a female on the x axis (if x were horizontal), one female on the y, and a male on the z.

if this is confusing think of it like a giant grid. x is left and right, y is up and down, and z is three dimensional (away from you and towards you).

these views are from looking at the asa from the side. i will look at my local shops for anything.

[luke]

http://www.mcmaster.com/#brass-pipe-tees/=4eyvnj

[Shirow]

http://www.mcmaster.com/#brass-pipe-tees/=4eyvnj

Those are almost right - they would work, just not be as clean.

I'm torn really between putting the LPR on my vert ASA or my back ASA. I don't think sleeper is an option because of my warp mount.