So I used my emag for the first time last weekend. I loved it! Except when I start to rapid fire all of a sudden there is a gas leak. If I turn off my Asa and turn it back on it goes away. This has happened in hybrid and electric mode. Any advice would be appreciated. Haven't had time to troubleshoot it more but I figure the gurus here might know what the issue is. Thanks!
-
-
Need to know where the leaks coming from brother.
Down the barrel, on/off, back of the regulator? -
Sounds like bolt stick.
Follow these steps progressively until fixed.
Add oil.
Adjust frame screw tensions.
Move to a longer spacer/larger carrier.Comment
-
Ah, bolt stick could be it! I will try to find some time to test it to see where the leak is coming from.Comment
-
Add oil to valve
shoot a good ~500 shots
Re-tune lvl X
shoot another ~500
Still messed up? then its your lowersComment
-
I'd say bolt stick as well. Try tuning your level 10. Remove all the powertube shims before doing this to ensure you don't accidentally get a shim induced leak.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment