I figured this should be in the tech forum, if not, feel free to move it.
So, I've got a frame coming in that looks like the one on this gun:
It's from an Etek Ego. Now, I don't know too much about these guns, or the differences between them and an Ego, but I don't really need to get into that right now either. I'm looking to start a new project with one of my spare Mags and wanted to try an Ego-Mag. Now, I realized after I bought the frame that it was different than an Ego frame, but for $25 bucks, I figured I could make it work. I did some searching and found this:
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/EAoieN7uPfo&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/EAoieN7uPfo&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
I believe this is was a build by Loguzzzzzz (By the way
to both you and Tbaggin) So, obviously it can be done with the frame (though it looks like I'll have to either spring for an E-mag length rail or go without a forgrip)
Anyway, my question is whether to go with a full on Electro-pneu setup and run it with a board and noid and everything, or just go with a standard Pneumag setup and put an MSV-2 in there and call it a day. If anyone has any experience with either setup with an Etek frame, I would greatly appreciate your input. I'm pretty handy, so I think I'd be able to build either setup, but as far as ease of maintenance and everything goes, which would you suggest. Now, I don't really expect this to be my primary gun, really just a project to have fun with (which is why I'm kind of leaning toward the EP).
If I do go with the EP, would I be able to use an Ego board in this frame? I'm looking and seeing that Scenario Dreams has Ego T-boards for $10, can't really go bad with that.
Thanks for your help. And if anyone has any other suggestions or additional insight which I may not be thinking of, feel free to comment.
So, I've got a frame coming in that looks like the one on this gun:
It's from an Etek Ego. Now, I don't know too much about these guns, or the differences between them and an Ego, but I don't really need to get into that right now either. I'm looking to start a new project with one of my spare Mags and wanted to try an Ego-Mag. Now, I realized after I bought the frame that it was different than an Ego frame, but for $25 bucks, I figured I could make it work. I did some searching and found this:
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/EAoieN7uPfo&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/EAoieN7uPfo&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
I believe this is was a build by Loguzzzzzz (By the way
to both you and Tbaggin) So, obviously it can be done with the frame (though it looks like I'll have to either spring for an E-mag length rail or go without a forgrip) Anyway, my question is whether to go with a full on Electro-pneu setup and run it with a board and noid and everything, or just go with a standard Pneumag setup and put an MSV-2 in there and call it a day. If anyone has any experience with either setup with an Etek frame, I would greatly appreciate your input. I'm pretty handy, so I think I'd be able to build either setup, but as far as ease of maintenance and everything goes, which would you suggest. Now, I don't really expect this to be my primary gun, really just a project to have fun with (which is why I'm kind of leaning toward the EP).
If I do go with the EP, would I be able to use an Ego board in this frame? I'm looking and seeing that Scenario Dreams has Ego T-boards for $10, can't really go bad with that.
Thanks for your help. And if anyone has any other suggestions or additional insight which I may not be thinking of, feel free to comment.