X-Valve Leak question - Regulator seat

[Tarl]

Just picked up an used micromag with a x-valve. It leaks out the back when I turn the velocity up. I assume it just needs a new regulator seat but...

Does the x-valve use the same regulator seat as the classic valve??? don't seem to be able to find a x-valve only reg seat at the AGD store.

Thanks all.

[xero28]

X-Valve parts are here:

http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.catalog&categoryID=23

It does take some searching to get there.

[Frizzle Fry]

Very different system:

http://img131.imageshack.us/img131/5427/xvalveexplodedff7.gif

[Ando]

That's the one you need.

http://store.airgundesignsusa.com/index.cfm?fuseaction=catalog.prodInfo&productID=112&categoryID=23

[secretweaponevan]

Are you using a chrono?

All mags are designed to vent out the back if the velocity (read: pressure) is turned up too high.

[Tarl]

If I try to push the velocity past 250 fps it will start venting out the back of the valve.

Thanks for all the help everyone.