How do you tell what carrier you have in your level 10? I only have one and want to order more. Problem is, the size is not on the carrier. Anyone know how the sizes on AGD correspond to actual measurement?
-
-
The carriers have dots and rings.
If it has no dots and no rings then it is the smallest carrier. Next size up would be 1 dot and no ring. Next size up would be 1 ring and no dots, next size up would be 1 ring 1 dot, etc. -
what he ^^^^^^ said!
Think of the DOTS as .5 and the lines as 1. So 2 lines and a dot is 2.5 As he said if yours has NO DOTS and NO LINES then it's the 0. a dot would be .5, line 1, line and dot 1.5, etc etc etc...
Sava????
DMComment
-
I had the same problem last summer. Someone showed me this.
Comment
-
Awesome! Thanks. I think I have 1 dot, but it is on two spots across from each other.Comment
-
I can't recall if there are 2 dots or 3 dots on them. but yes there is more than one I know. Either 1 180 from the other or 3 spaced at 120* from each other. I can't recall. But if you have 1 dot and no lines it's a .5 If you have 2 dots and no lines it's a .5, and if you have 3 dots and no lines its a .5Originally posted by fierymartel
Got it??? GOOD!
Keep in mind that the "DOT" that you see on the TOP of that pic is NOT the dot we are talking about. That is actually a hole drilled all the way through to allow the LX to work. The dot for sizing is on the side on one side of the rings. You should never have a dot on both sides of the line.
DM
And I always thought the sizing was the same as the L7 in that it was for the length, though I never cared and just went up or down or added shims...
Comment
Comment