macroline goes boom

[emopunker2004]

so i got a mag in trade, got here today, screwed in my tank and BOOM. i looked and my macroline exploded

[Ando]

LP line more then likely

[Jim2752]

so i got a mag in trade, got here today, screwed in my tank and BOOM. i looked and my macroline exploded

I think macro is only rated at 800psi @75 degrees, or the hose could have came loose before you aired it up.

[emopunker2004]

so i mean it actually explosed. like theres a hole in the side now

[BiNumber3]

there's a lot of cheap macroline on the market:/

[snoopay700]

This is why i don't trust macroline fully.

[emopunker2004]

and that thing was loud! lol guess i need more.

[Ando]

If your going to buy some, get it right here. I guarantee this stuff won't blow on you.

http://www.airsoldier.com/mm5/merchant.mvc?Screen=PROD&Store_Code=AOS&Product_Code=MACROLINE&Category_Code=FITTINGS

EDIT: Get the black hose. I had it at 2k yesterday testing my Geddon and shot 4 Dye lock lid tubes full of paint (600 rounds) with no issues.

[emopunker2004]

so wait its the same price for 10 ft as it is for 50? both showed a price of 16 bucks in my cart

[smeek]

so wait its the same price for 10 ft as it is for 50? both showed a price of 16 bucks in my cart

Look more closely at the cart. 50' is $16 + $27 for a total of $43.

[Spider-TW]

there's a lot of cheap macroline on the market:/

And even good stuff just sold for the wrong purpose.

I call the unrated cheap stuff marco-line.

[Sniper Steve]

Same thing happend to me once, but I had the gun up to my ear because I was looking for a leak, ruptured my ear drum. When it first happened I thought I was going to lose my ability to hear in that ear. Sounded louder than a shotgun.

[FA22RaptorF22]

Macroline should never be on a HP gun such as an automag. Only use steel braid grade or higher.

Macro is dangerous under alot of pressure.

[emopunker2004]

???? how is that? i ran macro on all my electros using the same 850 psi output tank i have now. Macro serves the same purpose here as it did there, it runs air from the asa to the regulator.

[FA22RaptorF22]

???? how is that? i ran macro on all my electros using the same 850 psi output tank i have now. Macro serves the same purpose here as it did there, it runs air from the asa to the regulator.

yeah, but remember that things have pressure ratings for a reason...

its that same reason that most mag owners use steel braid or stainless hard line.