Air America Raptor Regulator

[StormyKnight]

I just swapped my fixed Crossfire regulator for an Air America Raptor Adjustable regulator for use on my 'mag. The tank will be slung under the marker with a Kapp Dropzone Cradle. Being naive in the ways of HPA, is there an on/off adaptor that can be attached to the regulator's output nipple? If not, what do I use in terms of connecting the tank to the marker (hose/connector-wise)?

Another thought just hit me. Is there a way to replace the output nipple with a macroline fitting?

Any help would be appreciated.

[eelpout]

your options...

In the olds days we would take two female ss Quick disconnect fittings attach them to a braided hose with s slide check on/off between them. Some of the later slide check has a degas feature to them .

I have been using macro lines on my on/off asa's to my mags for a while and have had no problems. I know a lot people don't like the idea of macroline because of the inconsistent wall thinckness of the line sold. You would still need a ay to shut the air from the Raptor to the gun, they generally designed the bottle shut off with some sort of on/off.

Jim

[smeek]

You can use one of these and then use macro or SS braid.

[FA22RaptorF22]

You can use one of these and then use macro or SS braid.

Remember! That part is 1000psi MAX.

Many of these adjustables go far beyond that. So keep note of your pressure.

[ManInBlack]

I use a macroline fitting for the output on mine.

[vf-xx]

You can use one of these and then use macro or SS braid.

I've used this on an AA Armageddon tank w/o problems.

Also used a Pro-connect as my main fitting.