Mag's just in.. NEITHER WILL WORK!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Track89
    BMWSOB
    • Feb 2010
    • 49
    #1

    Mag's just in.. NEITHER WILL WORK!!

    So both guns arrived in the last few day's. since then ive put the Lvlx, benchmark and slpash kit together on one gun. The other is classic with ANS phaseII.

    Here's a video help better explain issues. Let me know if you need more info

    [IMG][img=http://img532.imageshack.us/img532/4038/dsc01615c.th.jpg] [img=http://img37.imageshack.us/img37/3258/147rm.th.jpg] [img=http://img171.imageshack.us/img171/1678/img2100q.th.jpg] [img=http://img716.imageshack.us/img716/7383/img2107n.th.jpg][/IMG]
    Tags: None
    • Ando
      Magusmaximus
      • Jun 2009
      • 4144
      #2
      Video?

      Lets see. You just installed a lvl 10 on one of them and it's venting out the back. Am I right?

      Give us an explanation on what they're doing and we'll try to talk you through it.
      Last edited by Ando; 03-05-2010, 09:22 PM.
      My Feedback

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          Yes, we need more info. Unless you tell us what is happening, we can't even guess at the problems.
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • Track89
              BMWSOB
              • Feb 2010
              • 49
              #4
              Originally posted by athomas
              Yes, we need more info. Unless you tell us what is happening, we can't even guess at the problems.

              My bad video is taking forever to load.
              -One will air up and leak when velocity is cranked up..
              -When it finally stops leaking the trigger is aired up but nothing will happen when pulled.

              -The second has a Lvl10 already installed and will sputter, short stroke and go full auto..

                Comment

                • athomas
                  Of course it works-its AGD
                  • Jan 2002
                  • 8039
                  #5
                  Where are the leaks coming from?

                  The first thing you probably want to do is take the valves completely apart and clean them. Inspect the orings. You should replace them all to start anyway, since they are guns that were not maintained by you. You don't know the quality of the orings or if the proper lubrication was used in maintenance.

                  Use the guides in the airgun.com tech section to check whether the proper orings are in their proper places.
                  Except for the Automag in front, its usually the man behind the equipment that counts.

                    Comment

                    • Track89
                      BMWSOB
                      • Feb 2010
                      • 49
                      #6
                      Originally posted by athomas
                      Where are the leaks coming from?

                      The first thing you probably want to do is take the valves completely apart and clean them. Inspect the orings. You should replace them all to start anyway, since they are guns that were not maintained by you. You don't know the quality of the orings or if the proper lubrication was used in maintenance.

                      Use the guides in the airgun.com tech section to check whether the proper orings are in their proper places.
                      will do, and is the classic parts kit good for the lvlv10?
                      Last edited by Track89; 03-06-2010, 12:31 PM.

                        Comment

                        Previous template Next
                        Working...