Emag wierdness

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cockerpunk
    Haters Gonna Hate
    • Sep 2004
    • 1383
    #1

    Emag wierdness

    my emag is getting silly on me. i think its the noid, but before dropping way to much money on a new one, make sure thats the problem.

    gun works fine on mech mode, fires as fast as i can pull it.

    in emode it doesn't it fires about 3 BPS or less on emode.

    board isn't shorting out, and without the valve in the gun, the noid snaps the sear as fast as it should. battery is at 17 volts.

    so the valve is working fine mechanically. and the board and electronics are working fine, but it just decided to stop shooting fast.

    i think the noid is no longer pulling very hard. im charging the battery to see if higher voltage will fix it.
    Last edited by cockerpunk; 04-10-2010, 05:18 PM.
    "because every vengeful cop with a lesbian daughter, is having a bad day, and looking for someone to blame"
    Tags: None
    • Beemer
      I could tell you but then.

      • Oct 2003
      • 3250
      #2
      Put the battery on the charger for 2 or 3 hours or more. It should get slightly warm towards the end. Check voltage right away. Should be more then 18 almost 20.

      Put on gun right away and try e-mode. How old is the Batt? could be puking out under load.

        Comment

        • cockerpunk
          Haters Gonna Hate
          • Sep 2004
          • 1383
          #3
          battery is stock as far as i know. it is an AGD one, not any new one.

          the battery is on the charger now, ill let you know how fast she rolls after its peaked out.
          "because every vengeful cop with a lesbian daughter, is having a bad day, and looking for someone to blame"

            Comment

            • cockerpunk
              Haters Gonna Hate
              • Sep 2004
              • 1383
              #4
              actually dialed my DC supply to 19 volts, and she rips.

              its the battery.
              "because every vengeful cop with a lesbian daughter, is having a bad day, and looking for someone to blame"

                Comment

                • mostpeople
                  Registered User
                  • Mar 2007
                  • 1680
                  #5
                  Get a new 1000mAh from KC in the dealers section.

                  If hes out, I can probably get ya one for the same price (pretty sure I have an extra)

                    Comment

                    • kcombs9
                      Registered User
                      • Sep 2006
                      • 908
                      #6
                      i see you figured it out, but if you ever need to replace the noid you can still contact the company that did them for AGD, and get it for about 30$. this is with out the plunger though. they can sell you a plunger but that ups the price a lot...

                        Comment

                        • SSP REAPER
                          FKC Founding Member

                          • Aug 2008
                          • 1831
                          #7
                          Tunaman also carries solenoids if you need them.

                            Comment

                            Previous template Next
                            Working...