Tank Regulator Mounting Ideas

[Aslan]

I'm looking at getting a bigger tank for my Minimag, and hopefully getting one with a MaxFlow reg on it so I can bump the pressure up a bit.

What I'm looking for are some pics from AO users out there that show how they've mounted the tanks w/regulators (Flatlines, Dynaflows, MaxFlows, etc...) to their markers. Right now, my Minimag has a Shocktech medium drop with an ASA attached. I'd like to keep the drop the same and find a way of mounting the reg to it. Pics from you guys and/or instructions would help me figure out what additional hardware I might need to convert from an ASA to attaching the reg. Hopefully the larger tank won't be too tight with the way my warp is mounted.

What I'm starting with is pictured below:




Thanks!

[BiNumber3]

Not sure if maxflo's have em but a lot of adjustable regs have built in dovetails, so u might be able to mount straight to that drop

[211]

mine with Hyperflow


I used a Kapp drop zone 3, reversed it and cut it to size

I really need to get an updated pic (Lukes vert feed mod, Ego feedneck, and Rotor)

[athomas]

When I had my maxflo on my gun, I liked it mounted directly under the grip. That way my wrist didn't have to bend out around the width of the bottle. The warp will sit ahead of the wide part of the bottle as well, so the gun remains fairly compact. If you put a large drop forward on the bottom of the grip, the gun gets short, tall, fat at the grip, and you have to bend like a pretzel to shoot it.