your thought on the hyperframe

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hillg
    Registered User
    • Nov 2007
    • 242
    #1

    your thought on the hyperframe

    I have a new hyperframe and I want to get your response to the frame and how good or bad it is. I plan on running an Xvalve with ULT. Is there anything else I should know?
    Tags: None
    • flyingpootang
      Magtechian with X disease

      • Dec 2005
      • 2276
      #2
      Make sure the sear isn't touching the noid when aired up. The 4 screws on top of the frame are for holding/adjusting the noid. A UTB board would be perfect fit. Contact Jai (p8ntbal4me) and I'm sure he'll hook ya up....
      http://automags.org/forums/member.php?u=13779

        Comment

        • skyless
          Registered User
          • Mar 2006
          • 576
          #3
          Originally posted by hillg
          I have a new hyperframe and I want to get your response to the frame and how good or bad it is. I plan on running an Xvalve with ULT. Is there anything else I should know?
          I have a 13bps hyperframe w/xvalve+ult and thought it was ok at first. I upgraded to a lighter microswitch and wow it's much nicer it's not hard to hit max bps. I'm also considering putting in a UTB, sounds like the way to make it really rip. I got mine used a few years ago and have never had any issues with it.

            Comment

            • Coralis
              Hyper Micro
              • Aug 2005
              • 1285
              #4
              Personally I love mine, I wouldn't ever go back. I keep mine set for 8 or 9 bps and its plenty fast for me.

                Comment

                • hillg
                  Registered User
                  • Nov 2007
                  • 242
                  #5
                  so as a direct bolt on it sounds like it should be fine. Still have not used it yet but look forward to seeing how it does.

                    Comment

                    • p8ntbal4me
                      No more UTBs!
                      • Aug 2003
                      • 2560
                      #6
                      One thing I have done with mine is replaced the solenoid and upgrade to a UTB.

                      The second thing I did was replaced the 80g switch with a 30g switch for a much more "walkable" trigger.

                      ~ P8nt

                      _______________________
                      Jai "P8ntbal4me" Menard

                        Comment

                        Previous template Next
                        Working...