Question on Guerilla brand tank fitment

[gofarlow]

I need to buy a new tank for an RT PRO. I saw a good price on the Guerilla Air 88 cubic inch 4500 PSI Compressed Air system featuring the Myth Regulator. I saw a note that it will not fit on some guns do to the gauage being close to the threads.

Is this a good tank to buy?
Does it fit on an RT Pro?

Thanks for the help.

Gary

[kcombs9]

the issue you run into is if you have a drop on your gun, cause the myth reg is so short. so if you don't have a drop on your asa I think a guerrilla myth HPA tank system should fit fine.

I would suggest Ninja air system if you want to look at an alternative.

[xero28]

It all depends on your setup and how the asa is. If you have a really small drop forward and the asa is forward a bit, then the gauge may hit the bottom of the drop or the frame. If you have a standard duck-bill, you'll be fine, it just depends on how you've got it. The Myth regs are standard mid-range (around 650 psi), you would probably want to get the higher pressure setup (around 900 psi) to make sure your gun has enough pressure going into it.

[gofarlow]

Thanks for the information.

-Gary