RT Classic leak...

[M600]

my automag leaks out the barrel as soon as i screw in an air tank..
it stops when i pull the trigger. i took it apart and checked every o ring around and they were all fine, replaced the power tube o ring and found out one was missing( replaced as well).
also took 2 o rings out the bolt since im guessing they aren't supposed to be there..
any help?
heres a pic of what i mean
http://img541.images....us/i/magt.jpg/

thanks

[Ando]

If you have a lvl 7 and you already changed out your PT oring then you need to get a spacer kit.

[Watcher]

Link doesn't work.


Yup. A spacer kit will clear it right up. You need a smaller spacer.

[M600]

alright thanks for the replies, but would a spacer make such a massive leak?

[M600]

ok i changed the spacer from a 235 to a 215 and its still leaking, i think im low on air as my gauge is showing 1000psi but its always wrong at low pressures....
could it also be the velocity adjustment?
thanks

[Ando]

It could be the velocity. Only one way to find out

[athomas]

Make sure your oring and spacer are installed in the correct order. The oring goes in first followed by the spacer. The only other oring in the powertube is on the tip and it is just to hold the tip from coming loose.