-
-
All of the retro/RT mags are the same except the Automag RT, which is often referred to as the RT classic. It uses a different valve. Internally, it is the same, but it is a different diameter and requires a different rail and body. It is the only mag that has parts that are not interchangeable with the others.
Input pressure to the valve determines reactivity. This pressure is the output pressure from the tank. Some tank regs are adjustable by the user. Some are not. If you know what you are doing, some can be increased using shims.Except for the Automag in front, its usually the man behind the equipment that counts. -
The intelli's will not affect the response of the valve other than the fact that if you were to put a ULT on off in the valve you would theoretically be able to walk the trigger close to the effects of an electronic trigger. Also, personal opinion here but, I have found that the triggers on intelli's are easier to hold down to cause the trigger to react by having a longer trigger rather than the shorter one of the stock frames. Another very minor positive is the fact that intelli's are lighter than the stock frames and are more aesthetically appealing... In short, they work better for some applications and look better than the stock frames.
Oh, and I agree with thomas ^^ 100%.Comment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment