RT rebuild help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • redmammon
    Registered User
    • Feb 2009
    • 24
    #1

    RT rebuild help

    Ok i have replaced a few orings on this valeve as im going to do a total rebuild. the only problem is i dont see 3 orings that look like the ones i need to replace. to the left of the part is 1 but my kit doesnt have the other 2 as i can tell. How do i get these orings off and back on without ruining the clip that holds them in? it is the orings on the left of the part. Help me guys lol
    Tags: None
    • Rdogx78
      Registered User
      • Jul 2010
      • 25
      #2
      The orings in the rebuild kit won't be brown, they're white. Look for ones that are the same size. I used a dental pick to install the new one, just be careful not to damage the oring when stretching it over the clip. If you have an Ace hardware they have a pick that works well next to the counter where they copy keys. I would just cut off the old brown orings.

        Comment

        • redmammon
          Registered User
          • Feb 2009
          • 24
          #3
          Originally posted by Rdogx78
          The orings in the rebuild kit won't be brown, they're white. Look for ones that are the same size. I used a dental pick to install the new one, just be careful not to damage the oring when stretching it over the clip. If you have an Ace hardware they have a pick that works well next to the counter where they copy keys. I would just cut off the old brown orings.
          they lood flat and squared edge though. I just replace them with rounded ones?

            Comment

            • Ando
              Magusmaximus
              • Jun 2009
              • 4144
              #4
              Ask your little friend on the lower left to eat it off for you
              My Feedback

                Comment

                • Rdogx78
                  Registered User
                  • Jul 2010
                  • 25
                  #5
                  Originally posted by redmammon
                  they lood flat and squared edge though. I just replace them with rounded ones?
                  The flat one with a squared edge is the spacer, not the oring. The oring will be a small fat donut looking one.

                    Comment

                    • the mag guy
                      pwning noobs since '83
                      • Jun 2006
                      • 408
                      #6
                      yes, you can replace them with round ones, thats what I did and my RT is shooting like a dream. the parts kit should come with another spacer too. Pull up the exploded diagram on the AGD website and you'll see that there are circular orings there instead of flat ones

                        Comment

                        • the mag guy
                          pwning noobs since '83
                          • Jun 2006
                          • 408
                          #7
                          Originally posted by the mag guy
                          yes, you can replace them with round ones, thats what I did and my RT is shooting like a dream. the parts kit should come with another spacer too. Pull up the exploded diagram on the AGD website and you'll see that there are circular orings there instead of flat ones

                            Comment

                            • Rdogx78
                              Registered User
                              • Jul 2010
                              • 25
                              #8
                              that looks right. Does it seal up now?

                                Comment

                                • redmammon
                                  Registered User
                                  • Feb 2009
                                  • 24
                                  #9
                                  that isnt mine but mine does look like that. yah it seels right i guess lol it doesnt leak and it shoots lol
                                  Originally posted by Rdogx78
                                  that looks right. Does it seal up now?

                                    Comment

                                    Previous template Next
                                    Working...