SO... I got my Minimag working no problems. I went to gas up my ULE custom after lubing/cleaning etc, and the second air goes through to the valve -- rapid fire. Is this usually just an issue that can be resolved by turning down the velocity, or is it more involved?
-
-
Tinkering with it. It rapid fires when I gass up initially, and every time the trigger is pulled. Any help would be appreciated! -
What happens when you hold down the trigger and keep it down?Originally posted by RagnaroktA
If it stops misbehaving your problem is with the on/off. If it continues there's probably something in your power tube.Last edited by factoid; 07-28-2010, 07:12 PM.Comment
-
-
Umm try oil yet?
Nevermind, I see you stated you lubed it. Like Ando the great said top two on/off o-rings probably need to be replaced, Although you may get away with only changing the sammler of the two.Comment
-
Played with it some more last night. It no longer fires when gassed up, now only when the trigger is pulled, and still full auto. I've got an X-Valve with ULT.Comment
-
-
I'll try it with varying numbers of shims tonight. When I took it apart last night there were only two shims in the ULT... hrm.Originally posted by AndoComment
-
Does your tank have adjustable output? If so crank it down to 800-850. You might want to try changing out the front spring as well as lowering the velocity.
2 shims in a ULT isn't a big deal, that shoudlnt cause a problem but each valve is a little
bit differentComment
-
Is there a continuous leak when you hold the trigger in after a shot?Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
Ragnarok from spudfiles and theopia?Comment
-
Nah, not I.
When I hold the trigger in, the thing goes rapid fire.Comment
-
That is an indication that one of the two top on-off orings are bad. Its usually the smaller one.Originally posted by RagnaroktAExcept for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment