Etek Mag Noid Help

[cfos00]

I'm starting an Etek-framed mag build, and wanted to see what noid would work. I saw xero28 mention that the noid that is normally used in Egomag builds is a little too big to fit into the frame. Which noid would fit in the Etek frame? Or is it going to have to be in the rail? I would love a little help here.

[TwilightG]

I think this one is popular: SMC-S070C-SDG-32

... but I've never done an Ego-mag build before.

[xero28]

I think this one is popular: SMC-S070C-SDG-32

... but I've never done an Ego-mag build before.

/\/\ Yes, this is the noid that I used. I had another one that was bigger and didn't work. I haven't actually tried to fit the smaller one in the frame (I've got it in a box in the front). But I'm pretty sure that Loguzzzzzz has put them inside the frames. If you're using an Etek2 frame you'll have more room since the board is a lot smaller and just runs along the back of the frame.

[cfos00]

Awesome, thanks for the help