Making an X-Valved, LVL 10, ULT Mag Faster

[RagnaroktA]

Anyone have any good tips? I got my Mag shooting again last week and it did really well, but I'd like to see how much HP I can get out of it.

[Ando]

Ok...Are you looking to RT faster or pull by pull?

[RagnaroktA]

Pull by pull I think, but I'm open to try it however is suggested. I'd like to be able to better walk the marker.

[SockMonkey]

I've got an air america raptor reg feeding my xvalve, I can get high 20's for BPS. but pull me pull shot its basically how fast can you pull the trigger for me. I dont have the ULT, though I may be getting one soon.

[maniacmechanic]

RT on/off with a E Mag pin

[Ando]

If your looking for pull by pull then a pneum mag is your best bet. Get with Tuna.


http://automags.org/forums/showthread.php?t=248020

Those frames are already drilled, milled and tapped. Only thing left is assembly on your part or someone else's of the Pneum kit. He should (hopefully) have a few grips left.

2 guys sell the Pneum kits for those grips.

http://automags.org/forums/showthread.php?t=226161
and
http://automags.org/forums/showthread.php?t=248401

It's not a cheap upgrade but it's defiantly a well worth upgrade if you have the cash

There's also another way to go by it and that's an electrical frame....
http://automags.org/forums/showthread.php?t=251927

Again, not a cheap upgrade but def a well worth upgrade.

If that's out of your range....you can always fall back on the good old Reactive Trigger...Your ULT will work. Just need a reg that can hit 1000+ PSI to push it.

[RagnaroktA]

Thanks for all the info fellas. I'd like to keep this marker mechanical, so e-mods are out for me. Can anyone recommend a good tank that puts out 1000+ PSI? Everything I have and have seen that's HPA is 850 PSI. Is there something I can do to my tanks to make them push more air?

I like the RT On/Off and Emag pin idea, but I'm not sure where to get them, or how much they generally run. Anyone have extras?

[secretweaponevan]

Pnue mags are mechanical and will give your trigger "electro-trigger lightness". Still 100% mechanical and you can hose if off at the end of the day.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/0FmKeSBv-IA&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/0FmKeSBv-IA&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

[kcombs9]

contact any of the tank manufactures and they can shim your reg for 900+ psi

[Ando]

This guys got a Geddon...$55

http://automags.org/forums/showthread.php?t=252567

[SockMonkey]

this guy has a nice little write up for nice regs with high/adjustable output.

http://www.zakvetter.com/pages/paintballs/automag_info/rapidfire/goodregs.html

Also, The Air America Raptor and Raptor Rex are nice high outs. The Raptor is for 3k tanks and Raptor Rex are for 4.5k. can find those new on Ebay, you just have to have a Kapp, or Kapp style, tank cradle/drop forward.

[SockMonkey]

I also have a decent Air America Apocalypse reg, with on/off. Those are meant for 3k tanks.

The Air America regs are nice because most of then are basically a Mag reg stuck on a tank. So the rebuild kits are easy to come by (same as a classic mag).

[captian pinky]

pm sent