Need some help with a Evil Pimp

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SteelSoul
    Registered User
    • Jun 2003
    • 315

    #1

    Need some help with a Evil Pimp

    I have been trying to get my sons Evil Pimp working again and everything was going good and then the light on the board started flashing green really fast. I cant get the marker to even shoot now. I have looked all over the interwebs for some kind of answer and I think its a Something in the Breech message. But there isnt anything in the breech.

    We are going to a 12 hour game this weekend and I really need to figure this out.

    Any ideas would be really be helpful.



    SS
    RT
    14in Lapco Bigshot
    Raptor 68/4500
    Revvy
    Good Traders:
    fire1811, Psychobillygoat,Chris,Tolley,rpm07,smegle5
  • athomas
    Of course it works-its AGD
    • Jan 2002
    • 8039

    #2
    Blinking green means the eye is turned off.

    Turn the gun on again and it will turn the eye back on. Don't hold the trigger when turning the gun on. That is what turns the eyes off.
    Except for the Automag in front, its usually the man behind the equipment that counts.

    Comment

    • SteelSoul
      Registered User
      • Jun 2003
      • 315

      #3
      ok I will give it a shot

      thanks
      RT
      14in Lapco Bigshot
      Raptor 68/4500
      Revvy
      Good Traders:
      fire1811, Psychobillygoat,Chris,Tolley,rpm07,smegle5

      Comment

      • SteelSoul
        Registered User
        • Jun 2003
        • 315

        #4
        Well I found out what the issue is, pinched the freaking wire for the eyes........
        I cut the wire and soldered it and used some heat shrink
        Working perfect now

        Thanks
        RT
        14in Lapco Bigshot
        Raptor 68/4500
        Revvy
        Good Traders:
        fire1811, Psychobillygoat,Chris,Tolley,rpm07,smegle5

        Comment

        Working...