Little SFL help here

[Jacob]

I just brought my new SFL out onto the field for the first time tonight. Let me first say sweet Jebus I will never need to buy another marker again. Unfortunately, about halfway through the night I noticed a small piece was missing. On the breach, across from the ball detent, is a threaded hole where there once was a small piece of plastic. Now there isn't. This leads me to my questions. First off, what is that piece of plastic? Second, is it vitally important? Third, will the elves be able to escape through there? Where can I get a replacement for this? Any help would be appreciated as I have a tourney next weekend and don't want to wind up on the field without my elf plug in.

Thanks in advance,
Jacob

[AGD]

Jacob,

Put your gun down, go buy a net, YOU NEED TO GO CAPTURE YOUR ELVES!! Those damn guys are hard to contain!

That hole is an optional ball detent that we were going to put the ACE in but we figured out a better way from underneath. You can just screw an old detent into it.

AGD

[Jacob]

Now that's what I'm talkin about, response time almost as fast as my trigger.
Thanks Tom

[Butterfingers]

Just remember to capture those elves otherwise your range and trajectory will suck

[Load SM5]

I'd recommend grinding the delrin ball out of the detent before you screw it in there. I did'nt and it pushed some of my feed tube into the breech too far and it ate my superbolt up. I went back to the plastic things. Shocktech sent me an extra with a few stickers. I glued mine back in and it's been fine.