cheater help

[DEEPSEA]

I am using an intelliframe and a cheater setup. The cheater is in the grip screw position, and I have sanded down the on off quite a bit. the sear is still touching the cheater and will not fire fast. I just retuned the level ten and it is much better than before, I want it to walk though. I have also taken apart the cheater and lubed it with auto lube. should I be using some dow or sleek in there? I have also loosened the valve screw too. I will be trying a lower pressure tonight. If I move it forward I think I will have to trim down the trigger rod for the cheater and don't want to do that unless it is a last resort...

Any ideas guys?

[vf-xx]

Stiffer trigger rod return spring, or magnet mod for the trigger.

[Newt]

Burn more puppets.

[flyingpootang]

Joe, what kinda LPR are you using? I have fad a couple of Ticklers give me problems with spiking when turned up and barely moved at lower pressure. I have a Palmer Micro Rock if you want to try it out PM me your address and I'll send it to you....