xvalve issues

[maineiacpballer]

So, I thought I had this marker working but now I am back at square one. I have never had a mag act like this and almost just said to hell with it today.

So, atm I am running on low air, proabably 1000psi in my tank max. I am able to put gas to the marker and sometimes able to get one shot and then the marker just wants to empty all the air in my tank.

Thoughts?

[factoid]

So, I thought I had this marker working but now I am back at square one. I have never had a mag act like this and almost just said to hell with it today.

So, atm I am running on low air, proabably 1000psi in my tank max. I am able to put gas to the marker and sometimes able to get one shot and then the marker just wants to empty all the air in my tank.

Thoughts?

Does your rail have a bushing installed? It's a small metal sleeve where you put the field strip screw in.

What happens when you hold down the trigger. Does the leak stop? If so check your power tube o-ring to see if it's getting worn or discolored. If that doesn't do it try putting in a larger carrier for your level 10 (using the same o-ring as your old one)

If it leaks even with the trigger held down check your on/off.

If nothing you try works there's always the nuclear options: buy a parts kit and just replace everything. That almost always fixes any valve problems.