I have an RT Pro valve with level ten. I played with it last Sunday and it started to leak out the hole on the left gun side opposite of the air intake valve. I assumed it was an on/off o-ring, I took it out and oiled it really well, but that didn't affect it at all. Is there anything I can do or check with out buying a repair kit? If you need more details tell me what you need, and I'll post.
-
-
Try re-seating your reg valve pin assy and oil the 2 reg seat orings. Shoot some oil through it as well. That's the typical fix for most leaks. -
That seemed to do the trick, thanks. Although, when I pulled the pin assembly out the brownish oring looked like it had a couple of pieces coming off of it. I'm guessing it is only a matter of time before it fails again. Can I replace the o-ring, or do i have to buy a whole new assembly? I have seen them on the AGD website, but couldn't fins them on the Tunamart website. Where is the best place to buy what I need?Originally posted by AndoComment
-
Link this pic to tuna and tell him which one you need. I know he has them.
If that ones browned out and falling apart, I bet ya you probably have a few more going to. You might as well get a full RT kit and replace everything for GP..Comment
Comment