Feed neck size of EGO?

[OPBN]

I need a clamping feedneck for a Lukes vert modded MM body. I know the feed neck is 7/8" and have found a Redz clamping feedneck in the past that fit, but can't seem to find one anymore. The one I bought before said it was for a Spyder and had three set screws. I just ordered a new one and the thing that came was the type with the tabs, not set screws. I thought I remember someone saying the Ego 5/6 feednecks were the same size. Anyone know?

[elgalloblanco]

The ego 5/6 clamping feed necks will work. If i remember correctly, Spidertw used a piece of brass stock about .023 thick in between the feedneck and the clamping feedneck. You might be able to find the brass at a hobby or craft store?

[211]

I use an Ego feedneck on my Lukes vert modded RT
it needs a spacer
I use the strap part of a hose clamp, works perfect

[elgalloblanco]

I use an Ego feedneck on my Lukes vert modded RT
it needs a spacer
I use the strap part of a hose clamp, works perfect

That is a good idea. Thanks for the tip