Classic valve going full auto

[nuevara]

Well, just as the title states, I have a classic valve that shoots good as long as I pull the trigger enough to shoot, but if I pull the trigger all the way back to the trigger frame the gun goes full auto. I've seen other threads witht this problem, just can't find them now. I've checked the sear and the bolt edge that it catches and no noticable wear on either. I had to replace the top of the on/off with a ANS one. Could that be it? Any input will be greatly appriciated. It's cool and all, but I just don't want to blend paint in the breach. Thanks again. -Rich

[Coralis]

check to make sure you put the on/off in back right .... i think you might of forgotten the large oring that goes in the bottom

[nuevara]

check to make sure you put the on/off in back right .... i think you might of forgotten the large oring that goes in the bottom

Double checked and it's in there. Change out the bolt spring and it fixed the problem.

[Spider-TW]

With the trigger back it shouldn't have been able to fire at all, regardless of the bolt spring.

As long as it works...

[athomas]

I agree with Spider-TW. With the trigger pulled back, it shouldn't be able to fire at all. That is usually an on-off top oring problem.