Some slight sydarm trouble

[Psychocide]

Hey there guys, I just picked up a sydarm and man am I happy. One small problem though, it does not seem to recharge fast enough. I can shoot 1 ball per second but if i tap the trigger twice in a row with no lag time the bolt does not go all the way forward and the ball just pops out of the barrel. Could it be the spring is not strong enough? or is it a problem in the valve/reg not recharging fast enough?

The internals seem to have plenty of oil and the condition of the parts seem to all be in great condition and nice and clean. Some one on mcarter brown said it might be the on off so I took a pic of it here they are even though it seems to be fine

[Smoothice]

what temperature are you playing in?

Mine will freeze up on a 85* day if I shoot to fast...

[Psychocide]

Its pretty cold out and shot a few shots, Im am just dry firing in my house which is about 65-75 degrees. I really dont think it is freezing up because it fails to shoot every time i shoot twice in a row, and if i shoot twice the gun will shoot the first, go about halfway the second shot and if i wait one second then it will shoot just fine again. Also the bolt stick will happen randomly on a shot.

[Ando]

Try shooting it with rounds. I have the same problem with mine. Won't work too well if I don't shoot something out of it.

[gmiller0]

Make sure ya have the sear pin to your trigger correctly spaced... There should be a little gap about the size of a credit card thickness between the trigger and the pin.. Also, are you by chance using a level 10 bolt?

[mpsd]

Did you try turning the velocity up? What about the spring pack inside your reg?