X-valve sear question...

[dahoeb]

I've got a classic automag, with the A/M rail and grey p/f body.

I'm thinking about putting an xvalve in, but I've heard that the classic mag rail has slightly different specs than rtpro and emag rails, and this could cause a conflict between the stock classic sear that my mag uses and the xvalve's on/off.

So my question is, if I put in my xvalve, will my stock classic sear work or do I need to use an rt spec sear? Thanks.

[Ando]

You'll be fine. You should have zero issues.

[dahoeb]

You'll be fine. You should have zero issues.

Thanks Ando.

[Spider-TW]

Yah. ^^^

I have one that is years old and has gobbled much paint in relatively few days of play.