Can any one tell me if the boards are interchangeable between the Mag, Spyder and Pirahana Hyperframe?. Mr Nearchos still has all my boards, but I found a Spyder Hyperframe board.
-
-
Originally posted by Deathss
Im not sure if they are interchangeable. You would be much better off installing a UTB in your hyperframe. It is a big improvement over the stock board, and pretty easy to install. -
I know this is an old post, but I just got a hyperframed mag and am curious what the utb is?Comment
-
Universal T board. It is what the name implies. It is tiny and can be used to run what ever you want that can trip a micro switch and solenoid. You have to be able to solder to install one but well worth it. Pretty much as far as you can go do a do it yourself board. Scenario Dreams has the wiring diagram on their site along with the boards them selves.Comment
-
They should be... using the same noid and all.Originally posted by Deathss
Actually, an ION board would be compatible too and allow for MUCH more user adjustability. They output 9v, pulse the dwell (for better battery life), and can pump up to 20watts of total power. Not to mention you can adjust for dwell and have the option for eye in the future.
Relocating the trigger switch and capacitor (for easy fitting) should be easy easy.
Just find a board with a broken solenoid for cheap.Comment
-
The Dragun Tboard should fit in the frame, you might need to drill some holes in the back if the buttons dont line
Damon doesnt have any up on his website anymore (http://www.scenariodreams.com/)
but if you email him he might still have a few
they were being sold for $9.99
if he doesnt have any, and you want to go this route, pm me I have a few of themComment
-
What about a Morlock board like the DevilMags...Easy install?Comment
Comment