Emag valve into an AA MM -problems

[djinnform]

I bought an Emag valve on AO. What do I need to do to it, to get it to work correclty in my AM MM?

Do I need to change any of the parts?

Right now it jams, hisses, and fires sometimes.

I trieded switching to the standard ON\OFF of the AM MM, but it does the same thing.

Thank you.

[OPBN]

What is the length of the on/off pin? Does it have a standard RT On/Off or ULT? If it came directly out of an Emag, it should have a .712 pin and a quad o-ring. You may want to try changing to a .750 pin and regular o-ring set. Also, if it has a Level X bolt, it may need to be retuned. More info on the total set-up may help as well.

[djinnform]

fixed it!

Thank you.

It was the quad o ring. Now it shoots pretty good with the Level 7. It only coughs about 1 in 20 trigger pulls.

[need4reebs]

Thank you.

It was the quad o ring. Now it shoots pretty good with the Level 7. It only coughs about 1 in 20 trigger pulls.

how did you fix it? which pin is being used?