CCM feedneck won't fit in Venomous body

[Shirow]

I purchased a Venomous body from Mongoose along with a CCM feedneck. I haven't had a chance to use the body since I received it and took it out for the first time today. The feedneck seemed to screw in OK the first time but came loose almost instantly and now doesn't fit at all. It is so loose that, even if I can get it to lock a little, if you pull up on it it comes straight out of the body.

Anyone else had this problem? Is it an issue with the feednecks? Hoping it's not the body but I don't have another feedneck to test with.

Hoping someone else has had this problem and it's just the feedneck - if so, I will just look for another one (any suggestions?)

[mag79]

The thread pitch might be different. It needs to be angel threads.

[Shirow]

The thread pitch might be different. It needs to be angel threads.

Yeah, I got the feedneck from Mongoose so I'm a little surprised it doesn't fit but that was my thought. Eyeballing the threads and 'measuring' them with a dental pick they seem to match, it's almost like the hole in the body is a tiny bit too large for them to catch properly.

[Shirow]

I'm contemplating just using red Locktite to get the damn thing to stay in there.. I can't imagine Mongoose shipped me one with the threading wrong. I don't know what's up with it, pain in the ass though, ended up not being able to play today because my feedneck kept falling out.

[OPBN]

Is this the only feedneck you have? Try one from another body.

[Shirow]

Is this the only feedneck you have? Try one from another body.

Unfortunately it is the only feedneck I have now. It seemed to fit fine when I got it so I sold my other body/feedneck

It came loose once I put a full hopper on it

Now it won't even screw in without the hopper attached

[Shirow]

For those of you with Venomous bodies, what feednecks are you using? I know the CCMs fit in some bodies as I've seen photographs of them using these feednecks.

Mine almost seems like it catches on the little hump on the neck of the feedneck itself that begins right after the threads.. it's rubbing against the back of the hole in the body the feedneck screws into. I think this is stopping the threads getting deep enough into the body to catch, not sure though.

[SSP REAPER]

Mongoose obtained the CCM feednecks from me. They are all angel threaded. I would suggest contacting Mongoose with pictures also so he can help you with the issue.

Pics would help here too of course

[Shirow]

Mongoose obtained the CCM feednecks from me. They are all angel threaded. I would suggest contacting Mongoose with pictures also so he can help you with the issue.

Pics would help here too of course

Here is a video!

Hopefully you get the gist though, I tried to point out where it was rubbing and show how it isn't catching at all. It is rubbing on the shoulder of the feedneck and on the body.

http://www.youtube.com/watch?v=U1yH_f78F6c

I did contact Mongoose, he asked me to send it back.. I'd really like to try and figure it out sooner though, hoping to actually get out and play for the first time in months next weekend

[BigEvil]

I have one of every one of his bodies and the angel ccms fit fine.

[Shirow]

I have one of every one of his bodies and the angel ccms fit fine.

I think I am just cursed between the problems I had with the rail and now this damn feedneck

I sat here all night screwing it in and out thinking it might wear enough anno away to catch and get in there but no luck

[Beemer]

Those feed neck threads are whack. Stop messing with it before you whack the threads on the body, if you havent already.

[Shirow]

Those feed neck threads are whack. Stop messing with it before you whack the threads on the body, if you havent already.

You think so?

The threads still look pretty decent in terms of being well defined on both the body and the feedneck but that's kinda the conclusion I'm at right now as well, can't see what else is up with it.

[OPBN]

Unfortunately it is the only feedneck I have now. It seemed to fit fine when I got it so I sold my other body/feedneck

It came loose once I put a full hopper on it

Now it won't even screw in without the hopper attached

Keeping this as proof for my wife there is a reason to have more than one marker at a time.

Yeah, but looks like something definitely isnt right with that. Hope it gets made right for you.

[Shirow]

Keeping this as proof for my wife there is a reason to have more than one marker at a time.

The funny thing is I had this exact conversation with my wife earlier today.

I went down to the field, knew it was going to rain but figured I could get in a couple of hours.

Get down there, my fittings start leaking out of the blue. Fix that, feedneck falls out. I mess with the marker for 90 minutes, it starts raining and I end up just leaving.

If I had a spare marker, I could've played at least!

She told me to get one but, unfortunately, she doesn't manage the finances so she doesn't know I really can't afford it