Putting a mag into storage

[FireFoxnz]

Due to work I will unable to use my level 7 mag (or my pre 2k evo cocker) for about couple of years so I will be sticking them into storage.
Is there anything that I should to to reduce any impact from the storage (e.g. to springs and o rings?)

Thanks
Steven

[Ando]

Only thing you have to worry about is the oil you use. I had an issue with the agd oil that came with the marker. It jelled up and turned a green color which also did in the orings. All I use now is Tri-Flow.

[Smoothice]

I would pull out the bolt spring.

[Spider-TW]

I would pull out the bolt spring.

I also back out the velocity adjuster.

[Drix]

I own a mag that sat on a workbench in a garage for 5-7 years. I just oiled it and pulled it out to play with no leaks, tweaks, or o-ring replacements. Just give her some oil before you put her down, taking the tension off the springs wouldn't be a bad thing, just make sure to keep everything where it will stay together.

[Frizzle Fry]

I own a mag that sat on a workbench in a garage for 5-7 years. I just oiled it and pulled it out to play with no leaks, tweaks, or o-ring replacements.

Same with the one I kept in my fishtank.

[FireFoxnz]

Thanks all,

lets see how this goes...

S