My FINALLY finished ego mag. Pics + Tuning questions

[Waffleman]

I think ive been working on this one for about 4-5 months now. And its put together and shooting well.
All of the custom milling/eyes/drilling was done by Lukes customs. I bought the frame already put together with the systemX LPR.
Also have the scenario dreams eyes in it

First some pics





Now for the tech question.
The gun is pretty quick, but it feels like the faster I rip on it its getting a hiccup or RT'ing itself because its forcing a ball into the end of the barrel and then the next shot explodes it out.
Is this a shim issue or something else?

Thanks for the tips

[Ando]

Could either be bad detents, sear bouncing off the ram or you need to do some fine tuning on your settings. DWELL...etc...

Its probably not letting the sear fully reset before the next shot. There's no 2 identical franken setups so you'll have to play with this on your own.

One thing you can do is toss on a mech frame and shoot the hell out of it to make sure there's nothing wrong with the valve then go from there.

[Spider-TW]

Which on/off do you have?

Make sure your total time between shots is at least 30 ms. Trigger bounces can cut that short.

[Waffleman]

Well ive narrowed it down to the on/off, it had a ULT in it for some reason, put one from an emag in and its shooting great.
I also put a higher output tank on it, so its one of those, i just ran out of air in my other tank