CCM Feedneck and Dye rotor issues

[turboboy808]

Rotor feedneck thingy is too large for the CCM feedneck. Does CCM make a larger diameter one to accomodate the rotor or is my only option to sand my rotor down? Thanks

[XrobX]

Loosen the clamp around the feed neck a lot, it'll be a tight fit but it works perfectly.

[maniacmechanic]

both my rotors fit all my CCM necks , never had this problem

[Nittany77]

both my rotors fit all my CCM necks , never had this problem

Did you get the NoRise or NoPro feedneck? According to CCM with a NoPro you'd have to cut down the hopper neck unless you have a rotor.

[Me�iCX]

All my mags had CCMs. Never a problem with a rotor. Like XrobX said, loosen the clamp all the way.

[SSP REAPER]

I only use CCM necks and a rotor never has been an issue. If you have a printed camo or pattern rotor it will be a little bigger than normal but will fit if you loosen the clamp.