68 classic trouble

[db1060]

hello yall im new to the automag forums.

i have a automag classic 68
it has the twist lock barrel

i just resently got my 68/mini repair kit and replaced everything with all the stuff from the repair kit.
but my power tube screw pieace has a crack in the inside and i have a peace on order.
i put my friends power tube screw n all the bottle stuff on my powertube/reg n my gun
is doing a response type shooting when i pull the trigger it shoots n when i let go it shoots
has anyone ran into this problem before

i have an eclipse rail the rare foregrip with barrel plug and sight rail
im thinking its possibly the eclipse rail that is making this happen

what do yall think it is? any idea's or anyone that has ran into this problem that knows how to fix it.

well thank you for your time and reading this post

dAn out.



<script src='http://imageshack.us/shareable/?i=sd411.jpg&s=812&p=tl' type='text/javascript'></script><noscript></noscript>

[Ando]

How on earth did you crack your PT tip?

Ck your on/off. Your probably missing a oring at the top...#22

EDIT: Just re-read your post. Take a pic of your sear and post it here.

[db1060]

How on earth did you crack your PT tip?

Ck your on/off. Your probably missing a oring at the top...#22

EDIT: Just re-read your post. Take a pic of your sear and post it here.

iv replaced everything im not missing #22 and i did check i will have to take my sear out right now and get a good look at it.

[BEEFYDAN]

classic problem

I encountered this problem once before and it ended up being a small piece of teflon tape, which had become stuck in the regulator valve spring. It caused the same type of problem, and it actually started after I had rebuilt and replaced the o-rings and the thread seals.

[athomas]

You didn't misplace the rail bushing when you had the mag apart? Check the sear pin as well. Also, make sure the on-off pin is not in upside-down. Make sure the on-off top is not in upside-down if it is one of the older ones.

It is possible that tolerance differences in the rails between the eclipse and the AGD rails could cause this problem, but if it was working before, changing orings shouldn't make it not work now.