PTP Emag won't fire at all

[athomas]

You are correct. It shouldn't be an issue.

Have you tried dropping a level 10 bolt into the breach to see if it fits?

[sQuidvision]

i had a similar issue with a ULE body... drove me nuts... AGD support recommended i experiment with different amounts of torque on the two bolts... hand tight on the front and a little extra with the valve or hand tight on the valve and a little extra in the front. Good luck, be sure to post up the solution when you find it!

[CyberKhan]

The bolt fits fine in the body, slides in and out no problem. I even took the spring off and tried that, and still wont fire. I know for a fact that the air is not getting past the on/off assembly because I purposely installed too large a carrier so that it leaks. On any other body, the instant I give air to the gun, the valve leaks down the barrel. On the red body, nothing happens.

I have also tried different tension on both the front and rear pins, no change.

[sQuidvision]

could/have you tried using the sear from the silver one?

[bigbthebenji]

obviously you guys are way ahead in diagnosing the problem, but to help, when I tested it before I sent, I only had 300 psi but it did activate the sear and shoot it in electro and mech, so I have no idea why it wont do it now. Anyways, I've got a parts kit on the way to cyberkahn so that should help him.

[Ando]

300psi and it activated the sear? What do you mean?

[CyberKhan]

Ya I didn't get that either as at 300 psi the gun won't even fire in mech mode. The noid will fire, which it does fine. But anything less than 750 and my other three mags wont even move the bolt. Especially with the level 10 kit.

Also its not an air pressure problem. I have a gauge on both mags and the output from my tanks is a solid 850. Took it down to the gun shop and cranked out up to 1000 still would not fire (they have an adjustable line)

Anyway, I'm out of town for a week, so will order a new pin and mess with kit when I get back.

[bigbthebenji]

Yeah, it sounds weird now that you mention it, but thats what happened. Aired it up at 300psi and shot like 15 times before the air completely went out.