EM Ripper troubles

[rawbutter]

With the board off, why is air still getting through the solenoid and piston?

[SSP REAPER]

BigEvil is the only guy to trust on getting that marker working as it should. He did Going_Home's and it turned out to be a ripping monster. Send BigEvil a pm here or on www.bigevilonline.com for help with your issue.

[Nobody]

BigEvil is the only guy to trust on getting that marker working as it should. He did Going_Home's and it turned out to be a ripping monster. Send BigEvil a pm here or on www.bigevilonline.com for help with your issue.

seconded.

Big Evil is your best option with this. he does work magic with mags that are problem children.

[p8ntbal4me]

I got the boards fixed on the Rippers,.. BigEvil figured out the issues with the rest of the front end (regs and such)

You really need to get him that gun and speak with him.

He really is the only one that can fix them.

[rawbutter]

Thanks for the replies. I did PM BigEvil, but I also got a reply back from CoolHand. He also thinks the LPR is the culprit. I'm gonna get a replacement and see what happens.

[hill160881]

if it is not made by Palmers I wold not trust it.

[rawbutter]

if it is not made by Palmers I wold not trust it.

I was thinking an SCM from AKA, actually.

[rawbutter]

Just wanted to give in update (in case anyone finds this thread sometime later and wonders what happened).

Turns out the Smart Parts Max-Flo LPR was indeed the culprit. (After I replaced it, I pulled it apart and discovered that part of the piston had been installed backwards. I'm assuming it came from factory that way. Good quality control there, Smart Parts. )

Anyway.... once I replaced the SP LPR with an AKA SCM, I haven't had any issues with the EM Ripper frame. And I gotta tip my hat to CoolHand. I know there was a lot of drama surrounding this frame, but when it's working the way it should, it indeed rips.