Y Frame Pneumag

[magguy87]

OK, so i have read all i can find on Pneumags, but i still need some advice. I have a y framed mag that i want to make pneumatic. I know it can be done, but i have read that it can be more challenging. I have an EP milled rail already and i want to run my lpr up front under my barrel, hints the milled rail. Do i have to drill and thread the extra hole in my veritcal asa myself or do they make ones with a front hole in them already? Also, which LPR should i use, i want something on the smaller side but also good for a pneumag. Also any advice for the y frame setup would be awesome as well. The info on this set up seems to be limited. Thanks in advance. I look forward to soaking up all the knowledge of the experienced maggers on this forum.

[renie]

you may be able to buy one pre done if not you'll have to drill and tap the frm yourself
its 1/8 27 npt thread
LPR ifu use a palmers u cant go wrong, ive used a tickler before but some people dont like them as they can be hit and miss but personally ive never had a problem, especially if u upgrade the oring

[Flatliner333]

I came very close to making my Y frame into a sleeper pneuframe so I know it can be done.I got distracted by another project I am working on and had to put it on hold for now.

[river031403]

tickler lpr

you may be able to buy one pre done if not you'll have to drill and tap the frm yourself
its 1/8 27 npt thread
LPR ifu use a palmers u cant go wrong, ive used a tickler before but some people dont like them as they can be hit and miss but personally ive never had a problem, especially if u upgrade the oring

how do you where do you upgrade oring on tickler lpr is it the blue piston valve oring???

[magguy87]

I came very close to making my Y frame into a sleeper pneuframe so I know it can be done.I got distracted by another project I am working on and had to put it on hold for now.

let me know when you finish it, I would love to see how it is done!

[renie]

If u change the black buna o-ring for a polyurethane one it gives a better seal and impros the regulation :)

[captian pinky]

Pamers micro rock there is a reason all cocker guys have one

[river031403]

Pamers micro rock there is a reason all cocker guys have one

yeah my pbshop guy keeps throwing his fully palmerized cocker in my face. He's like "its the best gun ever"

[renie]

Have you ever dissasembled a micro rock? There not a million miles different to a tickler internally

[renie]

Edit:

[river031403]

reg assembly

Edit:

nah the 1st reg i rebuilt was my sp inline maxflo regulator it was LP but now its HP