emag lowers and board trouble

[knownothingmags]

ok so i have tried this on two of my boards,
--->
-put a fully charged battery on the lowers.
-pull the pin nothing comes on.
-press the top button on the back of the lowers and the read out reads mod semi or mod psp.(depending on which board is hooked up)
-from there i cant change any settings.
-nothing lets me cycle through the settings.

any idea what this is?

help please,
thankyou,
KNM.

[OneSelfLost]

Is the bottom button completely depressing? Can you feel the click? The boards work in your other gun?

Since you can see the PSP mode, I'd guess the tourny lock is out (???)

Also, is the XMOD 1.x scrolling or does it go straight to MOD SEMI?

[knownothingmags]

Is the bottom button completely depressing? Can you feel the click? The boards work in your other gun?

Since you can see the PSP mode, I'd guess the tourny lock is out (???)

Also, is the XMOD 1.x scrolling or does it go straight to MOD SEMI?

Yes the button clicks just like the top one.
no scrolling just goes straight to mod semi.
Not sure about the turney lock . is that a plug?
yes it worked in my other guns

[knownothingmags]

i think we got it.

buddy of mine scavenged hes from an A-5 and hooked it up things are good.
thankyou for any and all help

KNM

[knownothingmags]

New issues

new issues and questions.

what does the FIX do on XMOD 1.8?

who can fix buttons on the emag board?

[Redic]

Tunaman can replace the buttons

[OneSelfLost]

I can replace buttons as well. Or any other component at that, including the microcontroller.

The board goes straight to the MOD setting when powered on with the top button pressed.

http://www.automags.org/forums/showthread.php?t=259058

I fix em for Tuna too sometimes.

[knownothingmags]

whats the FIX setting that i can cyle through mean on my xmod 1.8?

[athomas]

The FIX setting changes the delay for when a trigger input can be registered. It prevents the collapsing magnetic field of the solenoid from activating the HES and firing another shot. You want the number as low as you can get it without the gun going full auto.