PneuMag fires on every other pull

[Loguzzzzzz]

Forgot this. Add a trigger stop so that the trigger is not over traveling too much. this will also slow down the pneumatic system.

[need4reebs]

perfect explination what i was trying to say.
but was drinkin at the time.

haha KNM thats awesome happens to me all tha time

[Scooby_Z]

Ok sorry guys been gone for awhile here just read all the responses and advices...... ok so what I've done basically everything all you guys have suggested .... the only thing i didnt do is changed the firing pin.... even though I dnt think thats an issue here. What I have found here is that my on/off pin seems to be sticking which Im gonna ck on a mech frame to see ....
I had to turn the main valve up to the point where it started leaking out the back where ya adjust the velocity from and had to back it down and thats when the marker started to fire without mis firing and dis isnt tryin to walk it
So the funny thing is I have several valves ..... an RT , Emag valve ( which is the same thing ) and a Micro mag RT valve wich in all theory is all the same or am I wrong ??? .....
the I went ahead and threw in the micromag Rt valve and low and behold it fired ! it walked ! and it ripped with just dropping in the valve .....
So I'm guessing here its prossible it has something to do with my on off pin on both the emag , rt valve cuz it fires and den it doesnt fire.....
I'll try to get a vid up dis wknd if all possible so you guys can actually see whats really happening ......
but mos def thank you alot for all the support !

[Scooby_Z]

OK where do I begin ....
I have an old minimag valve wich has the 8 hole mod done to it , mind ya it hasnt seen action in over 8+ yrs
so I decided to throw it into the pneumag build for ****s and grins
it freakin wrks ! A bit of oil on the O rings , fires with no hesitation
walks , and beyond !!!!

so anyone can tell me why my Emag valve and RT valves isnt doin what its suppose to ?

[Ando]

They're screwed up and need to be tuned.

[Spider-TW]

Which on/off is in the minimag valve?

[Scooby_Z]

classic valve on/off is in the minimag..... well i think i resolved the issue , the only thing is i need a chrono wich i dnt have to actually know my velocity so I'll be back tomorrow with answers