Ule Id

[brycelarson]

Hi guys, I'm trying to get a complete list of what parts are on a recent pickup. It's an X-valve but I'm unsure of the on/off.

Does the ULE trigger on/off have a larger diameter pin? This guy looks to be about twice the diameter of a standard Rt on/off. It's got a two part body with Lv10 spacers in it.

thanks!

[Spider-TW]

Yeah, the bottom is big where it hits the sear. Inside the body you will find the skinny part. If you get in there, go ahead and clean and oil the shaft and tiny o-ring in there. Iirc, the fat bottom screws on to the pin and is usually loctite'd into place, but I think my well used one was no problem to take apart.

The top also has not a dual o-ring, but a bore-side o-ring in a groove and one for the pin-head.