who can help me?

[knownothingmags]

i would like to put a tube feed system like the phantoms? on this body anyone have good instructions on how to do this.
it is a right side feed if you cant tell.
and if so second question can i do it on this body still?
if i can still what all do i need to buy to get this done?
----------->
<a href="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223517.jpg"><img src="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223517.jpg" width="600" height="450"></img></a><a href="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223539.jpg"><img src="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223539.jpg" width="600" height="450"></img></a><a href="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223527.jpg"><img src="http://i741.photobucket.com/albums/xx60/thetoolishere/2012-03-07223527.jpg" width="600" height="450"></img></a>

[Wiscoballer]

I would just weld two small nuts onto it, drill 2 recess holes into the feed block, and bolt it down. Another alternative would be a custom feed block thats metal, that you can just weld on.

[sQuidvision]

JB Weld works for a cheap but non-removable solution.

[Ando]

Just drill and tap the body for the phantom feedtube block. Make sure you find or grind the screw your using so it's not protruding into the body too much.

[knownothingmags]

how much would a whole setup cost me low end and high end price.
for everything feedblock tube. good spring.

thanks,
KNM

[captian pinky]

i know someone that just drilled and tapped into the barrel threw the body seemed solid

[cougar20th]

I do the mod you are thinking about. The fact the body already has the feed off makes it perfect.
http://automags.org/forums/showthread.php?t=253413

[correia3]

luke does a nice job...unless you were looking for a DIY solution...

http://lukescustoms.com/page0003.htm