Just put on a hyperframe on my gen 2.5 micromag body with xvalve and ult, which had been working fine with a mech frame. When i gas the marker up it leaks like crazy down the barrel. On/off problem, maybe something to do with the sear? There is probably a thread somewhere, but i thought i would just ask. Any help would be great thanks.
-
-
Try removing some of the shims from the ULT.
Is the rail bushing in place?Except for the Automag in front, its usually the man behind the equipment that counts. -
ill give removing some of the shims a try. I was under the impression micromags didnt ahve rail bushings, i could be wrong?
Originally posted by athomasComment
-
You are correct a micromag doesn't need a rail bushing (unless someone has modified it). Did you use the same sear when you put on the hyperframe if not thats where I would look first .Comment
-
I'm waiting on air right now, but the sear actually came with the hyperframe.
Originally posted by CoralisComment
-
You are correct. I had minimag on the brain.Originally posted by WileyPB
The sear probably allows the bolt to sit farther forward. That means you will need to use a shorter powertube spacer.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment