LPR for Pneu question

[M98Punk]

Are their any LPR's that would fit in the same space as a 12 gram? or very very close to that size?

[Frizzle Fry]

Probably a PPS Rock or an ANS. Those would be the closest of any of the LPRs I've got sitting around. A sledgehammer would be the correct width, but I'm not sure it would work for whatever you're trying to set up.

Belsales would be a little bit small but a good fit. You could fit at least two WGP Ticklers in there.

[M98Punk]

I'm putting together a new tester mag. Actually if I can ever get the time it will be a double barrel pneumag but for the moment I wanted to to run an a sleeper lpr in an old Bucket changer I gutted the internals from.

[sQuidvision]

Cool idea!

[need4reebs]

I'm putting together a new tester mag. Actually if I can ever get the time it will be a double barrel pneumag but for the moment I wanted to to run an a sleeper lpr in an old Bucket changer I gutted the internals from.

Sa WeeT! im almost finished build my Nasty Pneumag! hoping to test this weekend! good luck with your build man!

[M98Punk]

Would love to see pictures... I love seeing examples of what my work would look like if it was less of a hack job :-P

[need4reebs]

any progress man??? did you find a lpr???

[M98Punk]

wait wait waiting.... I am waiting for the pnue parts and waiting for the grip frame.... hell I got the mag body back from luke then managed to get my mag to cocker barrel adapter stuck in the body.... which is what happens when you try to rebuild a gun in the 4 hours you have free in a week... loving my paychecks hating my 70 hour weeks at the moment.... Need to find a brass bar or maybe hit up a mechanic to get the adapter out then once I get the rest of the stuff I will find me a lpr

[need4reebs]

wait wait waiting.... I am waiting for the pnue parts and waiting for the grip frame.... hell I got the mag body back from luke then managed to get my mag to cocker barrel adapter stuck in the body.... which is what happens when you try to rebuild a gun in the 4 hours you have free in a week... loving my paychecks hating my 70 hour weeks at the moment.... Need to find a brass bar or maybe hit up a mechanic to get the adapter out then once I get the rest of the stuff I will find me a lpr

ill take a pic of the LPRs i have next to a 12gr and next to a benchy frame if ya want??? just let me know? wat did you have done to the body? did the adapter fit before the work was done?

[M98Punk]

I had it bead blasted and had a vertical feed mod done to it. It fit before but was tight I think due to the problems I had with the original barrel that the body is dented a tiny bit which is making it difficult, really I should have put oil on the adapter before I tried to put it in BUT i couldn't find mine and didn't now I have a headache ahead of me.... When I do get it out then get it lined back up properly I shouldn't have any problems because I'll just be unscrewing barrels from the Docs adapter.... and yes pictures would be super helpful

[M98Punk]

Ever get a picture of those lprs

[OPBN]

I have a micro rock. A 12g is .735 and the Micro rock is .8710 diameter. This is in inches.

[M98Punk]

So I should be able to make it work..... I think I am going to make the vertical Asa act like a T, drill the other side of it, run air through the left side of it thread the rock into the changer where the pin would be then hard line from the asa to the valve.... Clear cocker hose run through the slot Luke cut in the rail.. Just need time../. As it is I'll prolly have to hire out for th frame... Making tons of money but no time for tinkering