how would you describe the differece between a RPG chimera and a m90 frame

[Brak54]

as the title states

I like both i cant decide otherwise I might be picking up a Y grip off another AO user

[cougar20th]

The differances between a Chimera & M90 are fairly simple.

Both are AGD spec frames were it matters.

M90
-Can be a mech or pnuematic frame easily.
-Has all the mounting holes & channels to run it as a pnuemag frame. Its as easy as bolting the pnue parts into it. Especially if you contact tuna for the hardware kit. Even has holes for mounting a small switch if you wanted to play around some with a e-pnue setup.
-Bottom of the frame is threaded for sleeper mod (mounting the lpr inside the frame.) Still need to get a modded CP asa.
-Has a cutout above the trigger to add emag type magnets to help with trigger return.

Chimera
-Is a pure mech frame. Think a intelliframe with a 90* grip.

In my opinion the m90 looks better but that is preference.

[need4reebs]

as the title states

I like both i cant decide otherwise I might be picking up a Y grip off another AO user

i have used both...they feel the same, but i like the fact that the m90 frame is already drilled and tapped for pneumag parts! if they were both for sale for the same price i would get the m90! but they are both very nice frames!!!

[Brak54]

alright I think im going to go with the m90 frame than the only issue is its raw right now, so I will have to go get annoed for sure and polished im guessing?

so a viperblade would work with the m90 correct?

thanks for your input

[sQuidvision]

so a viperblade would work with the m90 correct?

Yup! Had one in mine for a short period of time.

[Brak54]

cool THANKS GUYS!

[cougar20th]

alright I think im going to go with the m90 frame than the only issue is its raw right now, so I will have to go get annoed for sure and polished im guessing?

so a viperblade would work with the m90 correct?

thanks for your input

Should work as a mech but beware according to Tuna the trigger stop on the viperblades are in the wrong place. I believe they line up with the hole for the pnue rod on the m90.

http://www.automags.org/forums/showthread.php?247366-The-Emancipator-Proclamation&highlight=EMANCIPATOR

[OPBN]

Should work as a mech but beware according to Tuna the trigger stop on the viperblades are in the wrong place. I believe they line up with the hole for the pnue rod on the m90.
http://www.automags.org/forums/showt...ht=EMANCIPATOR

^^^ Truth. My mentioning this fact to Rogue and asking if it was possible to get one without the trigger stops milled or one with the trigger stops milled lower resulted in getting a lecture on how AGD does not advocate trigger stops and also got me banned from PB Legion. Not that I really give a crap. Luke offers some nice triggers as does Acid Customs and both are considerably more pleasant to deal with.

An in my opinion, the M90 is a far superior frame than the Chimera for it's veratility.

[Brak54]

^^^ Truth. My mentioning this fact to Rogue and asking if it was possible to get one without the trigger stops milled or one with the trigger stops milled lower resulted in getting a lecture on how AGD does not advocate trigger stops and also got me banned from PB Legion. Not that I really give a crap. Luke offers some nice triggers as does Acid Customs and both are considerably more pleasant to deal with.

An in my opinion, the M90 is a far superior frame than the Chimera for it's veratility.

Those acid customs are NICE, I'm a carbon fiber junkie for everything from my motorcycle to my cars and real guns. I wrote to them on facebook i hope they have some still

[OPBN]

John from Acid has posted before in the dealers thread. Search Acid Customs and you should be able to find his thread.

[need4reebs]

Luke's triggers are very nice...i have the Anker and like it a lot!!! thanks Luke!!!!

[bbotts77]

I wrote to them on facebook i hope they have some still

I think John actually makes them to order. He's really great to work with. He did a custom trigger for me and I got it a lot faster than I thought I would, considering it came from Australia.