2nd Reg on Minimag

[DPB]

Alright, no lectures on why I don't need a reg on my mini cuz the valve already does this. Yes, I know. I got a reg for when I have to run CO2. I got a reg that cuts the liquid as well as reg pressure (200-800 supposable).

My question is this: Will my stock valve be affected by the decrease in pressure?

Last night was the first night I hooked the setup up and I didn't have a chance to tweak it before work this morning. It seems to have decreased the output pressure but I have trouble shot it to be certain.

Has anyone else run a similar setup? and what was the result? and what works best?

Thanks,
DB

[DPB]

have not troubleshot it.

[Predater]

you want an output pressure on a reguler mag around 800 or you will have shoot down. i run my 68mag at 750. it works great.

[krafty]

You don't *need* to know the output pressure of the 1st reg... I used a Palmer Stabilizer on my minimag for 2 years before going HPA, and I never had a gauge on it. Go to www.palmer-pursuit.com and track down the Stabilizer instructions. Just follow them with your own regulator.

[PyRo]

You want to get atlest 700 going into the AIR, after all secondery regs etc. You also want about 200-250psi differance between regs.